Kraang Finds
More ▾
Products About
Electronics YIHUA

YIHUA S200 Silicone Soldering Wire Holder with Brass Wool Cleaner

A heat-resistant silicone block that holds two wires for splicing, cleans the tip in brass wool and catches the scraps.

A portable USB-C soldering kit in an open pouch, repairing a string of fairy lights at a craft-fair booth
Best for Wire splicesconnectors on cables and lightsportable kitstables without a vise

Most portable repairs are wire repairs: a snapped lead on string lights, a cable that’s pulled out of a plug, a battery connector that came off. The hard part is holding two wire ends still while you solder them. This silicone block solves that with grooves that grip the wires in a straight line, so both hands are free for the iron and the solder.

Silicone makes sense for a kit. A slip of the iron doesn’t melt it, and it can be squashed into a bag without cracking. The brass wool pocket replaces the wet sponge, which is a nuisance away from a sink.

Pro tip Slide a piece of heat shrink over one wire before you lay the wires in the grooves. Once the joint is soldered, there’s no way to get it on.

Why we like it

  • ✓Six grooves hold wires (32–7 AWG) in line for a splice, hands-free
  • ✓Built-in brass wool tip cleaner — no wet sponge
  • ✓Small tray catches insulation scraps and loose parts
  • ✓Soft silicone survives being squashed in a bag
  • ✓Weighs about 110 g

Keep in mind

  • !Not a holster for the iron — it holds wires, not the soldering iron
  • !Too small to hold a circuit board
Material
Heat-resistant silicone
Wire grooves
6, for 32–7 AWG
Tip cleaner
Brass wool, built in
Tray
Yes, for scraps and small parts
Weight
About 110 g
Model
S200

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Electronics