Kraang Finds
More ▾
Products About
Electronics BTF-LIGHTING

BTF-LIGHTING Mini RF Dimmer with 14-Key Remote (Single Color)

An inline dimmer with a small remote, so a bright sign can turn into a soft night light.

Warm-white DIY neon rope sign glowing on a clear acrylic panel above a shelf, with neon tube and remote on a table
Best for Single-color LED strips and neon rope signs on 512 or 24 V

A sign that looks right in a lit room is often too bright at night. An inline dimmer fixes that without changing any wiring: it sits between the power supply and the sign, and the remote sets the level. The RF receiver doesn’t need line of sight, so the box can be hidden behind the panel.

The included screw-terminal adapter is the practical part. The neon’s power leads are bare wires; screwed into the adapter, they plug onto the dimmer’s output with no soldering at that end.

Pro tip Watch the current rating. Lamomo lists its full 16.4 ft reel at 36 W, about 7 W per meter, so 2 A at 12 V covers roughly 3 m (10 ft) of tube. A typical name sign is well under that.

Why we like it

  • ✓Brightness from 10% to 100%, with one-touch keys for 10/20/40/60/80/100%
  • ✓RF remote works without pointing at the receiver, up to about 65 ft (20 m) in the open, per the listing
  • ✓DC socket in, DC plug out, plus a screw-terminal adapter for bare wires
  • ✓60-second delay-off key and jump, fade and strobe modes

Keep in mind

  • !Rated at about 2 A, so keep the sign to roughly 10 ft (3 m) of this neon
  • !Single color only; it can't control RGB strips
  • !The remote is small and easy to lose
Input
5, 12 or 24 V DC
Output current
2 A per channel (see note)
Remote
14-key RF
Range
Up to 20 m (65 ft) in open space, per listing
Modes
Dimming, jump, fade, strobe, 60 s delay off
Model
RF14keys

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Electronics