Kraang Finds
More ▾
Products About
Electronics Arduino

Arduino Nano (A000005)

The original small Arduino — enough pins to drive a few servos and read a button, small enough to tuck behind a cheek.

Painted 3D-printed Halloween mask with a moving jaw on a workbench next to servos, an Arduino board and a battery box
Best for Wearables and propscontrolling servos and LEDsfirst Arduino projects

For a mask, the microcontroller has three jobs: send position signals to the servos, read a button or a sensor, and add a little randomness so the movement doesn’t look like a loop. The Nano does all of that, and the standard Servo library that comes with the Arduino IDE handles the servo signals.

The pre-soldered headers let you build the whole circuit on a breadboard first and move it into the mask only once the movement looks right.

Pro tip Don’t power the servos from the Nano’s 5V pin. Give them their own battery and connect only the grounds together; a servo pulling current through the board can reset it mid-movement.

Why we like it

  • ✓Genuine Arduino board (ATmega328P), not a clone
  • ✓14 digital I/O pins with PWM, plus 8 analog inputs
  • ✓Programs over USB from the free Arduino IDE
  • ✓Headers already soldered — fits a breadboard straight away

Keep in mind

  • !Mini-USB, not USB-C — you may need an older cable
  • !No Wi-Fi or Bluetooth; for phone control you'd need an ESP32 board instead
Microcontroller
ATmega328P
Digital I/O
14 (PWM capable)
Analog inputs
8
USB
Mini-USB
Software
Arduino IDE
Model
A000005

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Electronics