Kraang Finds
More ▾
Products About
Laser Engraving ZEERSHEE

ZEERSHEE Wooden LED Light Base, 9.4 in, Warm White, 2 Pack

A plain pale-wood bar with a long lit slot — the base that turns a 5 × 7 engraved pane into a night light with one switch on the cable.

A clear acrylic pane in a wooden LED base glowing with a frosted laser-engraved portrait of a dog, next to a phone showing the same photo
Best for Edge-lit acrylic photo panes up to about 9 in wideresin and crystal piecesgifts that need a switch rather than a remote

The round black bases sold for 3D illusion lamps have a short slot with closed ends, made for a plate with a narrow tab, and a diode laser can’t cut that tab into clear acrylic. A long wooden bar solves it: the slot runs most of its 9.4 in length, so a 5 × 7 pane stands in it sideways with its whole bottom edge lit, and a 4 × 6 or a cut-down piece fits just as well.

Warm white is the right choice for a pet portrait. The frost picks up the color of the light, and a warm tone makes a dog look like a dog rather than a hologram. The switch on the cable is the other quiet advantage for a gift: no remote to lose, no app, one click on the nightstand.

Pro tip Stand a plain blank in the slot before engraving anything and switch it on in a dark room. Where the light is strongest, in the lower two-thirds, is where the face should go; crop the photo with that in mind.

Why we like it

  • ✓A 9.4 in slot takes a 5 × 7 blank sideways, with the whole bottom edge over the LEDs
  • ✓Warm white light, the tone that suits fur and faces; no color cycling to cheapen a portrait
  • ✓USB powered with an on/off switch on the cable — a wall adapter, a laptop or a power bank all work
  • ✓Solid wood with a smooth natural finish per ZEERSHEE; two in the pack, one to test with and one to give
  • ✓Low and light — about 1.1 in tall and roughly 9 oz each

Keep in mind

  • !Warm white only — no dimming, no colors, no remote
  • !Nothing on the listing says a USB wall adapter is included, so plan on adding one to the gift
  • !The slot width isn't on the listing, so a 3 mm sheet may need a tape shim to stand straight
  • !Light enters only at the bottom edge, so a picture fades toward the top of a tall pane
Size
9.4 × 1.7 × 1.1 in (bullet says 1.8 × 1.2 in)
Material
Wood, natural finish
Light
Warm white LED
Power
USB cable with inline on/off switch
Count
2
Weight
0.51 kg (1.1 lb) for two

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Laser Engraving