Kraang Finds
More ▾
Products About
Laser Engraving Brilliance Laser Inks

Brilliance Laser Inks Black Metal Marking, Liquid Ready, 120 ml

A pre-measured marking powder that's mixed with alcohol and brushed onto bare steel, so a laser can fuse a black mark where it can't engrave.

A black powder-coated tumbler laser-engraved with a name in bright steel, beside a second tumbler on a roller rotary under an open-frame diode laser
Best for Bare or brushed stainless tumblersflasks and tags on a diode or CO2 laser

A blue diode laser reflects off bare stainless steel more than it marks it. The usual workaround is a marking compound: a thin coat goes on the steel, the laser heats it, and the compound bonds to the metal as a black mark wherever the beam passed. Everything else washes off.

That turns an unpainted or brushed steel tumbler into something a diode can personalize, with a dark line instead of the bright one you get on powder coat. It’s the option for a tumbler that’s already been bought, or for anyone who wants the plain steel look.

Pro tip The coat has to be even and fully opaque, but thin. Brush it on in one direction, let it dry completely, and hold the tumbler up to a light: any streak you can see through becomes a gap in the mark.

Why we like it

  • ✓Gives a black mark on bare stainless, aluminum, brass and copper, which a blue diode can't mark well on its own
  • ✓Pre-measured powder in the bottle — add denatured alcohol to the line and shake
  • ✓Foam brush included for a thin, even coat
  • ✓Dries in a few minutes, faster with a heat gun or hair dryer, per Brilliance
  • ✓Excess rinses or wipes off after the job

Keep in mind

  • !The listing says diode lasers from 10 W, but the label on the bottle lists only CO2, fiber and YAG — expect to test speed and power on a scrap first
  • !Results depend on the metal grade and how evenly it's applied, which Brilliance says too
  • !An extra step on every tumbler — coat, dry, engrave, wash
Form
Powder, mixed with denatured alcohol
Color
Black
Volume
120 ml (4.1 fl oz)
Metals
Stainless steel, aluminum, brass, copper, pewter
Lasers (per listing)
CO2 25 W+, fiber/YAG 10 W+, diode 10 W+
Included
Foam brush
Model
BLI101MBLIQ

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Laser Engraving