Kraang Finds
More ▾
Products About
Laser Engraving ACMER

ACMER S2 20W Laser Engraver with Air Assist

An open-frame 20 W blue diode with a 25 L/min air pump in the box — enough power to strip powder coat off a tumbler in one or two passes.

A black powder-coated tumbler laser-engraved with a name in bright steel, beside a second tumbler on a roller rotary under an open-frame diode laser
Best for Powder-coated tumblers on a roller rotarynames and logos on woodleather and coated metal

A blue diode doesn’t engrave stainless steel so much as remove what’s on top of it. On a powder-coated tumbler the laser burns the coating away and the bare steel underneath becomes the design, so what matters is having enough power to clear the coat cleanly without lingering. A 20 W module does that at practical speeds, and the included air pump keeps the burnt coating from settling back into the lines.

The open frame is what makes it work with a roller rotary. A 20 oz tumbler lying on rollers stands taller than a flat board, so the machine goes up on risers, the rotary sits underneath and the focus is set on the top of the cup.

Pro tip Before the first tumbler, measure from the bench to the bottom of the laser module, then from the bench to the top of a tumbler sitting on the rotary. The difference tells you how tall the risers need to be to reach the focus distance.

Why we like it

  • ✓20 W optical output from a 455 ± 5 nm blue diode, the power class that clears powder coat quickly
  • ✓25 L/min air assist pump included, which blows smoke and flakes of coating away from the lens
  • ✓Open frame, so it can stand on risers over a roller rotary and a tumbler
  • ✓300 × 285 mm (11.8 × 11.2 in) working area for flat work between tumbler batches
  • ✓Limit switches for homing; free ACMER Studio software, plus other engraving software per ACMER

Keep in mind

  • !Class 4 open frame — rated glasses for everyone in the room, and it never runs unattended
  • !Arrives as a kit to assemble, with no camera, enclosure or fume extraction
  • !The listing doesn't name a rotary or LightBurn, so check the rotary port and software setup with ACMER before buying a third-party roller
Laser
20 W optical, 455 ± 5 nm blue diode
Spot size
0.09 × 0.1 mm
Working area
300 × 285 mm (11.8 × 11.2 in)
Max speed
10,000 mm/min
Air assist
25 L/min pump, included
Files
NC, DXF, BMP, JPG, PNG
Software
ACMER Studio (free), others per ACMER
Warranty
1 year

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Laser Engraving