3DZWMAN
3DZWMAN LED Lamp Kit 001, 3 Pack (3 Colors, Dimmable, USB)
Lithophane lamps and shades, MakerWorld lamp models, giving three lamps at once
Two small smooth-jawed pliers to twist a jump ring open and closed — without scratching it or bending it out of round.
A jump ring is the weak link in a keychain if it’s opened the wrong way. Pulled apart sideways into an oval, it never closes properly and slips off. Twisted open with two pliers, one on each side of the gap, it closes flush again.
The chain nose and bent nose pliers in this set are the pair for that job. The round nose pliers and the cutter are useful for wire loops and charms later.
Pro tip Open the ring like a door, not like a mouth: one pliers pushes away from you and the other pulls toward you. Close it the same way, then wiggle it back and forth a little past closed so the ends press together.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
3DZWMAN
Lithophane lamps and shades, MakerWorld lamp models, giving three lamps at once
3M
Sanding primer on 3D prints, smoothing between paint coats, small prop and model work
Allen Tech
Replacing Bowden and hotend PTFE tubes, cutting pneumatic and silicone tubing
Amazon Basics
Powering USB lamps and LED strips, two lamps from one outlet, gifts that need their own plug