Kraang Finds
More ▾
Products About
3D Printing Amazon Basics

Amazon Basics 24W Dual Port USB-A Wall Charger, White

A white USB-A plug with 2.4 A per port — enough for a lamp kit or an LED strip, so the gift works straight out of the box.

Photo of a dog on a phone next to a glowing 3D-printed lithophane lamp showing the same dog
Best for Powering USB lamps and LED stripstwo lamps from one outletgifts that need their own plug

USB lamp kits and LED strips come with a USB plug and nothing to plug it into. A phone charger from a drawer often works, but older 1 A chargers can make an LED strip flicker or switch off. When the lamp is a gift, include a charger so the person who unwraps it can plug it in and see the photo light up right away.

This one has two full-power USB-A ports, enough for two lamps on the same outlet or a lamp and a phone.

Pro tip Plug the finished lamp into the exact charger you’re giving with it and leave it on for an hour before wrapping. It’s the best way to catch a flicker or a loose cable before the recipient does.

Why we like it

  • ✓Two USB-A ports, 2.4 A each (24 W total)
  • ✓Covers the 2 A minimum some USB LED strips need
  • ✓White housing that disappears next to a white lamp
  • ✓Automatic shutoff and internal safety switch, Amazon says

Keep in mind

  • !USB-A only, no USB-C port
  • !Not a fast charger for newer phones (non-PPS)
Ports
2 × USB-A
Output
5 V, 2.4 A per port
Total
24 W
Plug
US 2-pin
Model
LACA272

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More 3D Printing