Kraang Finds
More ▾
Products About
3D Printing 3M

3M Wetordry Sandpaper 03024, Assorted 320–800 Grit, 5 Sheets

Four fine grits for sanding primer smooth, wet or dry — the in-between step before color.

Painted 3D-printed Halloween mask with a moving jaw on a workbench next to servos, an Arduino board and a battery box
Best for Sanding primer on 3D printssmoothing between paint coatssmall prop and model work

This pack starts where primer starts. 320 knocks down the first primer coat, 400 and 600 smooth the second, and 800 gets the surface ready for a glossy color coat. Wet sanding with a little water keeps the paper from clogging with primer dust and keeps that dust out of the air.

It’s sold for automotive blending, but the grits are the same ones prop makers use on primed prints.

Pro tip Wrap the paper around a pencil, a dowel or a scrap of foam for the curves around the eyes and nose. Flat paper on a curved face sands through the primer on the high points first.

Why we like it

  • ✓Four grits in one pack — 2 × 320, plus 400, 600 and 800
  • ✓Use wet or dry; wet sanding keeps the dust down
  • ✓Silicon carbide abrasive
  • ✓Small 3 2/3 × 9 in sheets, easy to cut into strips for tight spots

Keep in mind

  • !No coarse grit — for big blobs or support scars you'll want 120–220 grit first
  • !Five sheets go quickly on a full-size mask
Grits
320 (×2), 400, 600, 800
Sheet size
3 2/3 × 9 in (9.3 × 22.8 cm)
Abrasive
Silicon carbide
Use
Wet or dry
Model
03024

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More 3D Printing