3DZWMAN
3DZWMAN LED Lamp Kit 001, 3 Pack (3 Colors, Dimmable, USB)
Lithophane lamps and shades, MakerWorld lamp models, giving three lamps at once
A deep frame with glass and a felt back — the ready-made light box that gives a stack of printed layers a finished edge and a way to hang.
The simplest way to turn a stack of printed layers into something that hangs on a wall is a shadow box: a picture frame with depth. The 1.5 in inside this one splits neatly into the three things a map light needs, a gap behind the diffuser for the light to spread, the diffuser itself, and the map on top of it, with the glass closing the front.
The back board is what you build on. Pull it out, stick the LED strip around the inside walls, file a notch for the cable, and the frame is a light box. The felt stays as a dark, non-reflective back, and the frame hangs in either orientation, so a long harbor and a tall river valley both work.
Pro tip Before you slice the layers, measure the opening from the inside of the frame, not the outside. The map should be about 1/8 in (3 mm) smaller than the opening each way so it drops in without forcing.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
3DZWMAN
Lithophane lamps and shades, MakerWorld lamp models, giving three lamps at once
3M
Sanding primer on 3D prints, smoothing between paint coats, small prop and model work
Allen Tech
Replacing Bowden and hotend PTFE tubes, cutting pneumatic and silicone tubing
Amazon Basics
Powering USB lamps and LED strips, two lamps from one outlet, gifts that need their own plug