Kraang Finds
More ▾
Products About
Electronics TMEZON

TMEZON 12 V 2 A Power Adapter (8 ft cord)

One wall supply for the whole topper — 12 V for the pump, stepped down to 5 V for the board.

DIY auto-topping pet water bowl with a sensor, clear reservoir and small pump, a cat drinking
Best for 12 V pumpsLED stripscameras and small DIY builds

The pump runs on 12 V and the board on 5 V. Rather than two wall adapters, it’s simpler to bring one 12 V supply into the project and step part of it down for the electronics. Two amps leave a comfortable margin for a small pump starting up while the board is on Wi-Fi.

The long cord helps more than it sounds: the outlet can stay behind furniture while the topper sits next to the bowl, with the cable routed along the wall.

Pro tip Wire the supply into the project with a female barrel jack to screw terminal adapter. You can then unplug the topper from the jack for cleaning without touching the wiring.

Why we like it

  • ✓12 V at up to 2 A, plenty for a small pump plus the board
  • ✓8 ft (2.4 m) cord, so the outlet doesn't have to be next to the bowl
  • ✓Standard 5.5 × 2.1 mm center-positive barrel plug
  • ✓Over-current, over-voltage and short-circuit protection, TMEZON says

Keep in mind

  • !Barrel plug only; you'll need a screw-terminal barrel jack adapter to wire it into a project
  • !No battery backup — the topper stops during a power cut
Output
12 V DC, 2 A (24 W)
Plug
5.5 × 2.1 mm, center positive
Cord
8 ft (2.4 m)
Wall plug
North American 2-pin
Model
MZ-M12V2A24

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Electronics