Kraang Finds
More ▾
Products About
Laser Engraving Tandy Leather

Tandy Leather DIY ID Wallet Kit

A pre-cut, pre-punched bifold ID wallet in natural tooling leather — engrave the flat cover, then stitch it together.

A natural veg-tan leather wallet laser-engraved with three initials, next to a masked cover panel and a test square, with an enclosed laser engraver behind
Best for First laser-engraved leather giftpersonalized ID or card walletlearning to stitch a wallet

Most “blank wallets” sold for engraving are finished goods, often in PU or coated leather that a laser handles badly. A kit in natural tooling leather is the opposite: the leather is raw vegetable-tanned hide with nothing on its face, which is what burns cleanly under a laser, and the pieces lie flat on the bed before they become a wallet.

That order matters. A finished bifold has a fold, a stitched edge and pockets that keep it from lying flat, so the focus is never quite even. Here the cover is a flat panel: engrave it, condition it, then stitch the wallet around it.

Pro tip Before engraving, lay the pieces out the way the instructions assemble them and mark the outside of the cover with a small piece of tape. On a pre-punched panel, the stitching holes tell you where the edges will be; keep the design at least 1/4 in (6 mm) inside them.

Why we like it

  • ✓Pre-cut and pre-punched, so the only cutting is done by the laser and the only tools are a needle and thread
  • ✓Natural tooling (vegetable-tanned) leather surface, the kind that engraves to a clean, even brown
  • ✓The cover can be engraved while it's still a flat piece, before anything is stitched
  • ✓Waxed thread, needle and instructions are in the box
  • ✓Folds to a compact 3.25 × 4 in (8.3 × 10.2 cm) with an ID window and pockets for cash and cards

Keep in mind

  • !Small — a design has to fit a cover of about 3 × 4 in, so it suits initials and short names, not big artwork
  • !The product photo shows a carved and dyed example; the kit arrives as plain natural leather
  • !Hand-stitching takes an evening the first time
Leather
Natural tooling leather, brown pocket lining
Finished size
3.25 × 4 in (8.3 × 10.2 cm), bifold
Features
ID window, card and cash pockets
Included
Pre-punched leather pieces, waxed thread, needle, instructions
Weight
2.4 oz (68 g)
Model
4141-00

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Laser Engraving