Kraang Finds
More ▾
Products About
Electronics Q-MING

Q-MING 60 W Adjustable Soldering Iron Kit (10-in-1)

Everything to solder the panel's power leads and the level-shifter board in one box.

A DIY pixel LED panel behind frosted acrylic showing a pixel Christmas tree and snowfall on a shelf, filmed by a phone on a tripod
Best for First soldering projectsLED wiringsmall electronics repairs

This build has only a handful of joints: the power leads, the capacitor and the level-shifter chip’s socket. A simple pencil iron with adjustable heat is enough for that, and the kit covers the small extras a first build needs.

The conical tip suits the chip socket’s pins; a chisel tip heats the thicker power wires faster.

Pro tip Tin both the wire and the pad before you join them, then touch them together with the iron for a second or two. Solder in a ventilated spot and wash your hands afterwards.

Why we like it

  • ✓Adjustable temperature, 200–450 °C (392–842 °F)
  • ✓Ceramic heater, with an on/off switch on the handle
  • ✓Comes with 5 tips, a stand with sponge, 0.6 mm solder wire and flux paste
  • ✓Plugs straight into a US outlet, no separate station

Keep in mind

  • !Temperature is set with a dial, with no display to show the actual tip temperature
  • !Basic stand is light; place it where the cord can't pull it off the bench
Power
60 W, 110 V
Temperature
200–450 °C (392–842 °F)
Heater
Ceramic
Included
5 tips, stand, sponge, 0.6 mm solder, flux paste

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Electronics