ACMER
ACMER S2 20W Laser Engraver with Air Assist
Powder-coated tumblers on a roller rotary, names and logos on wood, leather and coated metal
Black washable tempera — the dark coat that lets a blue diode laser leave a frosted mark in clear acrylic, then rinses off under the tap.
A blue diode laser goes straight through clear acrylic. There is nothing in the sheet to absorb a 450 nm beam, so the laser leaves no mark at all, which is why clear sheet is on every diode maker’s “can’t” list. The way around it is a dark coat on the surface: the paint absorbs the beam, heats up, and the acrylic under it melts into a frosted mark. Then the paint comes off and the frost stays.
Hobbyists have settled on washable tempera for the coat because it covers in a layer or two and washes off with water, where spray paint needs a solvent and a dry-erase marker only covers a few square inches evenly. Black is the color: it absorbs the most and shows the coverage best.
Pro tip Two thin coats beat one thick one. Brush or sponge the first on, let it dry until it’s fully matte, then cross it with the second. Hold the sheet up to a lamp: any pinhole of light coming through is a spot the laser will skip.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
ACMER
Powder-coated tumblers on a roller rotary, names and logos on wood, leather and coated metal
Artliving
Displaying engraved coasters and small plaques, finishing the gift
ATOMSTACK
Cutting wood and acrylic on a diode laser that has an air-assist nozzle, cleaner engraving on wood
Brilliance Laser Inks
Bare or brushed stainless tumblers, flasks and tags on a diode or CO2 laser