Kraang Finds
More ▾
Products About
3D Printing Polymaker

Polymaker PolyLite PLA Pro Filament, 1.75 mm, 1 kg, Black

PLA that prints as easily as the regular kind but takes knocks better — useful for a mask that gets worn, dropped and packed away.

Painted 3D-printed Halloween mask with a moving jaw on a workbench next to servos, an Arduino board and a battery box
Best for Wearable printsmasks and cosplay partsfunctional parts that need to survive a drop

A mask is a big, thin shell that gets pulled over a head, bumped in doorways and thrown into a bag at the end of the night. Regular PLA prints it fine but can crack along the layers when it flexes. A tougher PLA keeps the easy printing and gives the shell more room before it snaps.

Black is a practical choice for a Halloween mask: any spot the paint misses, such as the inside of the eye holes, disappears instead of showing up as a bright plastic color.

Pro tip Print the mask with 3–4 walls instead of heavy infill. A thin shell with solid walls is lighter on the face and stronger at the edges than a thick, mostly empty one.

Why we like it

  • ✓Higher impact resistance than standard PLA, Polymaker says
  • ✓Prints at ordinary PLA settings (210–230 °C nozzle, 20–60 °C bed)
  • ✓±0.02 mm diameter tolerance
  • ✓Cardboard spool, many colors on the same listing

Keep in mind

  • !Still PLA — it softens in a hot car or near a heat gun, so a mask left in the sun can warp
  • !The listing mixes "old" and "new formula" colors, so check which one you're ordering
Material
PLA Pro (impact-modified PLA)
Diameter
1.75 mm ± 0.02 mm
Weight
1 kg
Nozzle
210–230 °C
Bed
20–60 °C
Model
PA07001

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More 3D Printing