Kraang Finds
More ▾
Products About
3D Printing PAUTIX

PAUTIX 5 V USB COB RGB LED Strip, 4.92 ft (1.5 m), Remote and App

A dotless color-changing strip that runs from a USB plug — long enough to line the inside of an 8 × 10 frame and light the water blue.

A glowing layered 3D-printed city map night light in a black shadow box frame, with the unlit layers, acrylic sheet and LED strip for a second one on the bench
Best for Backlighting layered maps and light boxesunder-shelf lightingsmall USB lamps

The light behind a map has one job: to be even. Ordinary RGB strips are rows of separate LEDs, and every one of them shows up as a bright spot wherever a layer is thin. A COB strip packs the LEDs so densely that it glows as a continuous line, so what reaches the map is a wash of color rather than a row of dots.

Color is the fun part of a map light. Set the strip to a soft blue and the harbor looks like water; set it to warm white and the whole thing looks like a paper cut lit from behind. The strip remembers the last setting, the remote has a timer, and the whole thing runs from the USB port of a phone charger. The 1.5 m length lines the inside of an 8 × 10 frame with about half a meter to spare.

Pro tip Stick the strip to the inside walls of the box with the LEDs facing the diffuser, not the back. Light that hits the acrylic directly from the edges spreads better than light bounced off a dark felt back.

Why we like it

  • ✓COB strip with 816 LEDs per meter — one smooth line of light, no dots showing through thin layers
  • ✓RF remote plus a Bluetooth app, with memory for the last color and a timer
  • ✓5 V USB — runs from a phone charger, no power brick or wiring
  • ✓Cuttable at the marked points, 3M adhesive backing, 10 mm wide

Keep in mind

  • !Needs a USB port that supplies 2 A or more, PAUTIX says — a weak port means flicker or drop-outs
  • !If you only ever want warm white, a single-color COB strip gives more light for the same current
Length
4.92 ft (1.5 m)
LEDs
1224 (816 per m), COB
Width
10 mm
Power
5 V USB, 10 W, port of 2 A or better
Control
RF remote and Bluetooth app, memory, timer
USB cable
2.5 ft
Model
COB-USB-RGB816F010-1.5M

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More 3D Printing