Kraang Finds
More ▾
Products About
Electronics Panasonic

Panasonic eneloop AA Rechargeable Batteries, BK-3MCCA4BA (4-Pack)

Four NiMH cells that make 4.8 V — right in the range micro servos are rated for, and rechargeable for next Halloween.

Painted 3D-printed Halloween mask with a moving jaw on a workbench next to servos, an Arduino board and a battery box
Best for Powering servos in props and costumesRC modelsanything that eats AA batteries

Servos want a supply that can deliver a burst of current every time they move. A pack of AA NiMH cells does that well, and four of them in series sit at the low end of what micro servos are rated for, so there’s no voltage regulator to add.

Alkaline AA cells in the same holder start at about 6 V, which is the top of the servo’s range. NiMH cells stay lower and steadier, and can be recharged between nights.

Pro tip Put the battery pack in a pocket or on a belt and run a thin cable up to the mask. 100+ grams hanging on the back of a mask pulls it off the face and makes it tiring to wear.

Why we like it

  • ✓4 × 1.2 V = 4.8 V, inside the MG90S's 4.8–6 V range
  • ✓2000 mAh minimum capacity per cell, Panasonic says
  • ✓Up to 2100 recharge cycles, Panasonic says
  • ✓Pre-charged — usable out of the pack

Keep in mind

  • !Charger not included in this pack
  • !4 AA cells weigh about 108 g — noticeable if mounted on the mask itself
Chemistry
NiMH
Voltage
1.2 V per cell
Capacity
2000 mAh (min)
Cycles
Up to 2100
Weight
27 g per cell
Model
BK-3MCCA4BA

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Electronics