Kraang Finds
More ▾
Products About
Laser Engraving Ortur

Ortur Laser Rotary Roller (YRR 2.0)

A motorized two-roller rotary that turns a tumbler under the laser, adjustable in seven steps for cups from 8 to 110 mm across.

A black powder-coated tumbler laser-engraved with a name in bright steel, beside a second tumbler on a roller rotary under an open-frame diode laser
Best for Tumblerscansbottles and other straight or gently tapered cylinders on a desktop diode laser

A flat-bed laser moves in X and Y. A rotary takes over the Y axis: instead of the head moving forward and back, the rollers turn the cup underneath it, so a design can wrap around the side. The laser doesn’t know the difference, it just sends the same Y moves, and the software converts them into turns of the roller.

Rollers suit tumblers better than a chuck does. The cup lies on two rubber wheels with nothing pressing on the coating, it goes on and comes off in seconds, and the same jig takes a 12 oz skinny tumbler and a 30 oz one by moving the second roller to another slot.

Pro tip Rubber rollers grip by friction, and friction drops when they’re dusty. Wipe them with a little isopropyl alcohol before a batch, and if a tumbler still slips, slow the engraving speed rather than adding weight.

Why we like it

  • ✓Seven width settings for objects 8–110 mm (0.3–4.3 in) in diameter, which takes a 20 oz tumbler with room to spare
  • ✓Rubber-covered rollers turn the object by friction, so there's no chuck to clamp a cup into
  • ✓Plugs into the laser's Y-axis port and works with LightBurn and LaserGRBL per Ortur
  • ✓Ortur says it fits other brands' machines too
  • ✓Small and light (2.4 lb), so it stores on a shelf between jobs

Keep in mind

  • !On other brands Ortur says the blue and green wires at one end of the cable may need swapping — check the pinout before plugging in
  • !A roller only turns what rests on it; a tapered tumbler has to be shimmed level or the design slants
  • !The laser has to be raised on risers to clear a tumbler on the rollers
Object diameter
8–110 mm (0.3–4.3 in), 7 settings
Drive
Stepper motor, rubber-covered rollers
Connection
Laser's Y-axis port
Software
LightBurn, LaserGRBL
Size
5.1 × 7.2 × 3.2 in
Weight
2.4 lb
Model
Ortur YRR (2.0)

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Laser Engraving