Kraang Finds
More ▾
Products About
Laser Engraving ORTUR

ORTUR Laser Master 2 S2 LU2-10A Laser Engraver, 10 W

A 10 W diode laser with a 0.05 × 0.1 mm spot on a 390 × 410 mm bed — fine enough for a photo, big enough for a whole set of coasters.

A phone photo of a dog next to the same dog laser-engraved on a black slate coaster and a pale basswood tile, with the laser engraver idle behind
Best for Photo engraving on wood and slatecoasters and small plaquesfirst diode laser

A photo engraving is thousands of tiny dots, and the dots can only be as small as the laser’s spot. A 10 W diode with a compressed 0.05 × 0.1 mm spot is the class of machine that renders fur, whiskers and the catchlight in an eye on a 4 in coaster, while still having the power to cut a plaque shape out of 1/8 in basswood afterwards.

The Laser Master 2 S2 is an open-frame machine, which is what makes it affordable and what makes the safety gear below non-negotiable. The frame bolts together quickly, LightBurn and LaserGRBL both drive it, and the module has an air-assist port ready for the pump. Plan for a room with a window, and keep the pets out of it while it runs.

Pro tip Set the focus with the module’s spacer on the top surface of the piece, not the bed. Slate coasters vary in thickness, so refocus for each one; a focus that’s off by a millimetre turns crisp dots into a soft smudge.

Why we like it

  • ✓10 W optical output with a compressed 0.05 × 0.1 mm spot for fine photo detail
  • ✓390 × 410 mm (about 15 × 16 in) engraving area holds a plaque or a full tray of coasters
  • ✓Works with LightBurn and LaserGRBL and takes JPG, PNG, BMP, SVG and DXF files
  • ✓Built-in air-assist port on the laser module
  • ✓A G-sensor stops the laser if the frame is bumped or tilted, and the beam stops if the USB link drops
  • ✓Metal frame, assembled in about 10–15 minutes per ORTUR

Keep in mind

  • !Class 4 open frame — everyone in the room needs rated laser glasses, and it must never run unattended
  • !No enclosure, so smoke needs a window and a fan, or an enclosure bought separately
  • !A 2020 design without a camera or auto-focus; newer machines are quicker to set up
Laser module
LU2-10A, 10 W optical (blue diode)
Spot size
0.05 × 0.1 mm
Engraving area
390 × 410 mm (15.4 × 16.1 in)
Software
LightBurn, LaserGRBL (Windows; macOS via LightBurn)
File formats
SVG, DXF, JPG, PNG, BMP, TIF
Laser class
Class 4
Weight
9 lb (4.1 kg)
Model
Laser Master 2 S2 LU2-10A

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Laser Engraving