ACMER
ACMER S2 20W Laser Engraver with Air Assist
Powder-coated tumblers on a roller rotary, names and logos on wood, leather and coated metal
A 50 L/min pump with an inline dial for the air-assist port on ORTUR's LU2-10A and LU3 modules — less soot on the wood, less residue on the lens.
Air assist is the accessory that laser makers say they’d never go back from. A steady stream of air at the nozzle pushes smoke out of the beam’s way, so the laser hits the wood instead of a cloud, and the lens doesn’t slowly coat itself in resin. On a photo it shows as cleaner midtones and fewer brown smoke stains around the engraving.
This pump is ORTUR’s own, with the LU2-10A module on the list, so it connects to the port that’s already on the Laser Master 2 S2. Other brands sell matching pumps for their modules; the dial, hose and push-fit fitting are the same idea everywhere.
Pro tip For photos, turn the dial down. A light stream is enough to keep the lens clean; a strong blast cools the wood and lightens the burn. Whatever setting the test grid ran at, leave it there for the real piece.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
ACMER
Powder-coated tumblers on a roller rotary, names and logos on wood, leather and coated metal
Artliving
Displaying engraved coasters and small plaques, finishing the gift
ATOMSTACK
Cutting wood and acrylic on a diode laser that has an air-assist nozzle, cleaner engraving on wood
Brilliance Laser Inks
Bare or brushed stainless tumblers, flasks and tags on a diode or CO2 laser