Kraang Finds
More ▾
Products About
Electronics Miuzei

Miuzei MG90S Metal Gear Micro Servo (2-Pack)

The standard tiny servo with metal gears — strong enough to move a jaw or eyebrows, small enough to hide inside a mask.

Painted 3D-printed Halloween mask with a moving jaw on a workbench next to servos, an Arduino board and a battery box
Best for Moving jawseyes and eyebrowssmall animatronicsArduino projects

The MG90S is the same size as the common blue SG90 hobby servo, but its gears are metal. That matters in a mask: a jaw that gets pushed by hand, or a linkage that jams, strips plastic gear teeth quickly.

At about 2 kg·cm, one servo moves a lightweight printed jaw or a pair of eyelids through short pushrods. Heavier parts, or long levers, need either a bigger servo or a shorter arm on the horn.

Pro tip Center the servo in code (90°) before you screw the horn on. Then the horn sits in the middle of its travel and the mechanism can move the same distance both ways.

Why we like it

  • ✓Metal gears, tougher than the plastic-gear SG90
  • ✓2.0 kg·cm stall torque and 0.08 s/60° at 6 V, Miuzei says
  • ✓4.8–6 V — runs directly from a 4 × AA NiMH pack
  • ✓13.5 g each, with horns and mounting screws in the box

Keep in mind

  • !180° range only, no feedback — the Arduino tells it where to go, it can't report back
  • !Hobby-grade servos can buzz or jitter at rest; noticeable inside a quiet mask
Torque
2.0 kg·cm (6 V)
Speed
0.08 s / 60° (6 V)
Voltage
4.8–6 V
Rotation
180°
Weight
13.5 g
Gears
Metal
Pack
2 servos + horns + screws

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Electronics