Kraang Finds
More ▾
Products About
Electronics MAIYUM

MAIYUM 63/37 Rosin Core Solder Wire, 0.8 mm, 50 g

A pocket-sized spool of easy-flowing 63/37 rosin core solder in a thin gauge for electronics and wire repairs.

A portable USB-C soldering kit in an open pouch, repairing a string of fairy lights at a craft-fair booth
Best for Circuit boardswire splicescable and toy repairsportable kits

For a repair kit, the forgiving choice is 63/37 tin-lead solder. It goes from solid to liquid at one temperature instead of passing through a mushy stage, so a joint is less likely to crack if a hand or a wire moves while it cools. That helps when you’re working on a folding table instead of a bench.

The rosin core carries its own flux, so ordinary wire splices and through-hole joints need nothing else. The 50 g spool is small on purpose: it takes up little space and is easy to swap out.

Pro tip Prefer to avoid lead? Pack a spool of lead-free (SAC305 or similar) instead and run the iron about 30–40 °C hotter. Whichever you carry, don’t mix the two on the same joint.

Why we like it

  • ✓63/37 tin-lead melts at a single point, 361 °F (183 °C), so joints set quickly and cleanly
  • ✓Rosin flux core (1.8 %) — no separate flux needed for most jobs
  • ✓0.8 mm (0.031 in) is thin enough for boards and thick enough for wires
  • ✓50 g spool fits in a small pouch

Keep in mind

  • !Contains lead — wash your hands after use and keep it away from kids, food and drinks
  • !A small spool runs out quickly on big wire jobs
Alloy
Sn63 / Pb37 (tin-lead)
Melting point
361 °F (183 °C)
Flux
Rosin core, 1.8 %
Diameter
0.8 mm (0.031 in)
Weight
50 g

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Electronics