ACMER
ACMER S2 20W Laser Engraver with Air Assist
Powder-coated tumblers on a roller rotary, names and logos on wood, leather and coated metal
Pale, fine-grained basswood plywood — the wood that gives a laser photo the most tones between light and dark.
The wood decides how many shades a photo can have. Dark woods and strong grain fight the image, and resinous pine burns unevenly. Basswood is pale with a fine, quiet grain, which is why it’s the sheet most laser makers reach for when the job is a face rather than a logo. The laser’s burn goes from honey to dark brown, and all of it reads against the light background.
At 1/8 in the sheets are thin enough that the same 10 W diode that engraved the photo can cut the plaque or ornament free afterwards, with a hole for a ribbon if the gift is going on a tree.
Pro tip After engraving, wipe the bare wood with a barely damp cloth before anything else touches it. It lifts most of the smoke haze around the image; oil or clear coat applied first would lock the stain in.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
ACMER
Powder-coated tumblers on a roller rotary, names and logos on wood, leather and coated metal
Artliving
Displaying engraved coasters and small plaques, finishing the gift
ATOMSTACK
Cutting wood and acrylic on a diode laser that has an air-assist nozzle, cleaner engraving on wood
Brilliance Laser Inks
Bare or brushed stainless tumblers, flasks and tags on a diode or CO2 laser