Kraang Finds
More ▾
Products About
Electronics LEDMO

LEDMO 12 V 5 A (60 W) Power Supply, UL Listed

A UL-listed 12 V brick with headroom to run the whole reel of neon, not just one name.

Warm-white DIY neon rope sign glowing on a clear acrylic panel above a shelf, with neon tube and remote on a table
Best for 12 V LED strip and neon rope projectssigns and accent lighting

A short name sign draws far less than 60 W, so this supply is more than the minimum. The extra capacity is useful: it runs cool, it can power the whole 16.4 ft reel if you later turn the offcuts into a second sign, and it matches the 12 V 3–5 A supply the Lamomo neon listing recommends.

The UL listing matters for something that will hang on a wall and often stay on for hours in a bedroom or a kid’s room. The brick itself is plain: AC cord in, barrel plug out, which goes straight into the dimmer’s input socket.

Pro tip Before you connect the sign, measure the barrel plug with a multimeter: the center should read +12 V. Then plug it into the dimmer, never directly onto wires you’re still soldering.

Why we like it

  • ✓12 V DC at up to 5 A (60 W), within the 3–5 A range Lamomo recommends for its neon rope
  • ✓UL listed, per the listing
  • ✓Detachable AC cord and a barrel-plug output
  • ✓Universal 100–240 V AC input

Keep in mind

  • !Indoor only (IP20); keep it dry and out of enclosed spaces
  • !A desktop brick on a cord, so it needs a place to hide behind or below the sign
Input
100–240 V AC
Output
12 V DC, 5 A (60 W max)
Protection
IP20 (indoor)
Connector
Barrel plug
Model
HTY-1200500

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Electronics