Kraang Finds
More ▾
Products About
3D Printing KINGFOREST

KINGFOREST Split Key Rings with Chain and Jump Rings, 1 in, 50 Sets

The metal half of the keychain — a split ring, a short chain and a jump ring for each of fifty prints.

A child's crayon drawing of a cat next to a 3D-printed keychain of the same cat in matching colors
Best for 3D printed keychainsbag charmsresin and craft pendants

A printed keychain needs three bits of metal: a split ring for the keys, a short chain, and a small jump ring that goes through the hole in the print. This kit has all three, so there’s nothing to match or measure.

Fifty sets is more than one drawing needs, but once a kid sees their drawing on a keychain, there are usually more drawings coming. The extra rings also work for bag tags and zipper pulls.

Pro tip Design the hole in the print at least 5 mm wide and 3 mm from the edge. A hole closer than that can snap off the first time the keychain drops.

Why we like it

  • ✓50 key rings with chain, plus 50 separate open jump rings
  • ✓1 in (25 mm) ring, a standard keychain size
  • ✓Short 1.1 in chain lets the keychain hang and swing freely
  • ✓Polished nickel finish

Keep in mind

  • !The 0.4 in jump ring needs a hole of at least about 4 mm in the print
  • !Nickel-plated, not stainless — the finish can wear on a keychain used every day
Sets
50 rings with chain + 50 jump rings
Ring diameter
1 in (25 mm)
Chain length
About 1.1 in
Jump ring
0.4 in (10 mm)
Material
Nickel, silver finish

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More 3D Printing