Kraang Finds
More ▾
Products About
Laser Engraving Fiebing's

Fiebing's Aussie Leather Conditioner with Beeswax

A beeswax conditioner from a long-running leathercraft brand — puts back the oil the laser burned out and seals the cover.

A natural veg-tan leather wallet laser-engraved with three initials, next to a masked cover panel and a test square, with an enclosed laser engraver behind
Best for Finishing a freshly engraved veg-tan walletconditioning saddlesboots and leather goods

The laser takes the moisture out of the leather it burns, and a natural veg-tan wallet that goes straight from the machine into a pocket marks with every drop of water and every greasy finger. A conditioner puts oil back into the fibers, and a wax in it slows down how fast water gets in.

The catch with natural veg-tan is color. Any oil or wax darkens it, sometimes by a lot, and the pale leather around the engraving is what makes the design stand out. That’s why it gets tested on the same scrap as the laser settings: some makers like the warmer, darker look, others use a thin coat and buff it hard.

Pro tip Apply it in thin coats with a soft cloth in small circles, over the whole panel at once rather than patch by patch. Uneven coverage on veg-tan shows as blotches; one even, thin coat and a buff the next day look better than one heavy coat.

Why we like it

  • ✓Contains beeswax, which stays near the surface and gives raw veg-tan some water resistance
  • ✓Soft paste that works into the engraved areas with a cloth or a small brush
  • ✓Fiebing's lists leathercraft among its uses, along with saddles, boots and bags
  • ✓A large jar — a wallet takes a fingertip's worth, so it lasts for many projects

Keep in mind

  • !Darkens natural veg-tan noticeably, which also lowers the contrast of the engraving — test on a scrap first
  • !Can leave a waxy film in the engraved letters unless it's brushed out and buffed
  • !Not a hard top coat; the wallet needs another thin coat when it looks dry
Type
Leather conditioner with beeswax
Size
About 14–15 oz (label 15 fl oz, 400 g)
For
Leathercraft, saddles and tack, boots, shoes, bags, furniture
Made in
USA
Model
AULC00T015Z

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Laser Engraving