Kraang Finds
More ▾
Products About
3D Printing ELEGOO

ELEGOO PLA Filament, 1.75 mm, 1 kg, White

Plain white PLA — the material a lithophane is made of, because white lets light through in even shades of gray.

Photo of a dog on a phone next to a glowing 3D-printed lithophane lamp showing the same dog
Best for Lithophaneslamp shadeslight boxeseveryday PLA prints

A lithophane is a photo stored as thickness: thin plastic glows bright, thick plastic stays dark. That only works if the plastic itself is neutral, which is why almost every lithophane is printed in plain white PLA. Colored filament tints the whole picture, and silk or translucent filaments wash the detail out.

A full 1 kg spool is enough for many panels and shades, plus a few test prints. Buy one spool and stick with it: once a calibration print looks right with this white, every lithophane after it will too.

Pro tip Before printing the photo, print a small thickness test strip (most lithophane tools offer one) and hold it in front of the light you’ll actually use. It shows how dark your thickest setting really gets.

Why we like it

  • ✓White is the standard color for lithophanes — it shows the photo in neutral tones
  • ✓±0.02 mm diameter tolerance
  • ✓Dried and vacuum sealed before packing, ELEGOO says
  • ✓Many colors on the same listing for the lamp base and frame

Keep in mind

  • !Each brand's white lets through a different amount of light — switching brands means test-printing again
  • !Glossy finish; a matte white hides layer lines on the lit side a little better
Material
PLA
Color
White
Diameter
1.75 mm ± 0.02 mm
Weight
1 kg
Part number
CA-EL-3D-PB02

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More 3D Printing