Kraang Finds
More ▾
Products About
3D Printing ELEGOO

ELEGOO Centauri Carbon 3D Printer (CoreXY, Enclosed)

An enclosed printer that arrives assembled and calibrated — so a first lithophane is about the photo, not about tuning the machine.

Photo of a dog on a phone next to a glowing 3D-printed lithophane lamp showing the same dog
Best for Lithophanes and lampsfirst printer for gift projectseveryday PLA and tougher filaments

A lithophane is one of the most forgiving things to print well and one of the easiest to print badly: it’s a thin, tall wall where every wobble and layer shift shows up as a stripe in someone’s face. A stiff, enclosed printer that comes calibrated removes most of those variables before the first print.

The Centauri Carbon arrives assembled, levels its own bed and has a build volume big enough for a 6-inch panel or a lamp shade in one piece. The camera is handy for lithophanes in particular: they print for hours, and you can check the first layers from another room.

Pro tip Print lithophanes standing upright with a brim, not lying flat. The printer’s fine horizontal movement then draws the detail, and the brim keeps the tall, thin panel from rocking loose halfway through.

Why we like it

  • ✓Arrives fully assembled and pre-calibrated, with auto bed leveling
  • ✓256 × 256 × 256 mm (10 × 10 × 10 in) build volume — room for a large panel or a tall lamp shade
  • ✓Enclosed CoreXY frame on a die-cast aluminum chassis
  • ✓Built-in chamber camera for checking long prints and recording time-lapses
  • ✓Dual-sided plate with a PLA-specific surface, ELEGOO says

Keep in mind

  • !About 16 × 16 × 19 in — it needs its own table, not a corner of a desk
  • !Prints one material at a time; multicolor needs the separate Combo version
Build volume
256 × 256 × 256 mm
Motion
CoreXY, up to 500 mm/s
Nozzle
Hardened steel, up to 320 °C
Leveling
Automatic
Camera
Built-in, chamber
Size
15.67 × 15.9 × 19.29 in
Model
Centauri Carbon

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More 3D Printing