ALITOVE
ALITOVE 5 V 10 A Power Supply Adapter (50 W)
WS2812B panels and strips, 5 V LED projects, small 5 V electronics
Senses water through the side of the bowl — nothing in the water for a pet to chew, knock over or lick.
A float or a pair of probes in a pet’s water bowl lasts about as long as it takes the pet to notice it. A non-contact sensor sits on the outside of the bowl and detects the water through the wall, so the bowl stays an ordinary bowl that you can lift out and wash.
Mount the sensor at the height you want the water to stay at. Below it, the output says “no water” and the pump starts; once the water climbs back past the sensor, the pump stops. The bowl must be plastic, glass or ceramic, and the sensitivity usually needs tuning to the wall once it’s mounted.
Pro tip Set the sensitivity with the bowl in place, first empty and then filled to just above the sensor. A sensor tuned on the bench can miss the water through a thick ceramic wall, or trigger on a wet hand.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
ALITOVE
WS2812B panels and strips, 5 V LED projects, small 5 V electronics
Arduino
Wearables and props, controlling servos and LEDs, first Arduino projects
BOJACK
Smoothing LED power inputs, power-supply repairs, stocking an electronics bench
BTF-LIGHTING
Single-color LED strips and neon rope signs on 5, 12 or 24 V