Kraang Finds
More ▾
Products About
Laser Engraving Creality

Creality Honeycomb Working Table, 500 x 500 mm

An aluminum honeycomb that lifts the work off the table, so smoke and heat have somewhere to go besides the back of the piece.

A diode laser on a honeycomb bed with air assist, safety glasses, a rotary, an enclosure and engraving blanks on a workshop bench
Best for Cutting plywoodacrylic and felt on a desktop diode laserprotecting the table under the machine

Cutting straight on a wooden table or a sheet of scrap has two problems. Smoke has nowhere to go but sideways, so it stains the underside of the piece, and the beam that makes it through starts burning whatever is below. A honeycomb bed fixes both: the work sits on thin aluminum walls, air moves under it, and the beam that passes through spreads out before it reaches the plate at the bottom.

Creality’s version is sized for the large work areas of current open-frame diode machines. It also gives the work a flat, repeatable surface, which helps when you place a second piece in exactly the same spot as the first.

Pro tip Brush the cells out every few jobs. Resin and ash that build up on the honeycomb walls get reheated by the next cut and leave brown marks on light woods.

Why we like it

  • ✓8 mm honeycomb cells let air and smoke escape under the workpiece, which means less soot and flashback on the underside of a cut
  • ✓Comes with a full-size aluminum plate that sits underneath, so a cut-through beam lands on metal, not on the table
  • ✓500 x 500 mm (19.7 x 19.7 in) covers the work area of most open-frame diode lasers
  • ✓Honeycomb is held by metal posts in a metal frame, which keeps it flat

Keep in mind

  • !It raises the material, so the laser has to be refocused (or lifted) for the new height
  • !At 8.8 lb and almost 20 in square it needs a frame big enough to stand over it — check your machine's footprint first
  • !Tiny cut-out parts can drop into the cells; pin small jobs or leave tabs
Size
500 x 500 mm (19.7 x 19.7 in)
Cell size
8 mm
Material
Aluminum honeycomb, metal frame
Included
Aluminum base plate, same size
Weight
8.8 lb
Part number
Creality 4005020009

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Laser Engraving