Kraang Finds
More ▾
Products About
Laser Engraving Creality

Creality Falcon A1 10W Enclosed Laser Engraver

An enclosed, Class 1 10 W diode with a camera — small leather pieces go in a box, and the camera shows where the design lands.

A natural veg-tan leather wallet laser-engraved with three initials, next to a masked cover panel and a test square, with an enclosed laser engraver behind
Best for Engraving small leather goodswallets and keychainsmakers who want an enclosed laser indoors

A wallet cover is small, and a design that’s 2 mm off center looks wrong. That’s where a camera earns its place: the image of the bed shows the leather piece, the design is dragged onto it on screen, and the job lands where it was placed instead of where a guess put it.

The enclosure is the other reason this machine fits leather work. Creality rates the Falcon A1 Class 1, so with the lid closed the beam stays inside, and the box keeps the smoke in one place where an exhaust hose can carry it out. The machine still needs a window or a vent, and someone in the room while it runs.

Pro tip Tape the leather down to the honeycomb at the corners, outside the design. Veg-tan isn’t perfectly flat, and a corner that lifts a millimetre or two shifts the focus and the camera’s view of where the edge is.

Why we like it

  • ✓Fully enclosed with a tinted lid; Creality rates it Class 1 and says it blocks 99% of laser light
  • ✓HD camera for positioning a design on a small piece, which a wallet cover needs
  • ✓Pauses when the lid opens, plus an emergency stop button
  • ✓Comes pre-assembled
  • ✓Works with Creality's Falcon Design Space as well as LightBurn and LaserGRBL
  • ✓Up to 600 mm/s (36,000 mm/min) on a CoreXY motion system

Keep in mind

  • !Heavy and bulky at 28.7 lb — it needs a dedicated table spot
  • !The enclosure contains smoke but doesn't clean it; burned leather smells strong, so the exhaust still has to go outside
  • !The camera's material recognition is a starting point, not a substitute for a test on the actual leather
  • !Not for highly reflective materials such as mirror-finish metal or mirrored acrylic, per Creality
Laser
10 W optical, blue diode
Safety
Class 1, enclosed, lid interlock, emergency stop
Max speed
600 mm/s
Positioning
HD camera
Software
Falcon Design Space, LightBurn, LaserGRBL
Honeycomb panel
460 × 346 mm (18.1 × 13.6 in)
Weight
28.7 lb (13 kg)
Model
Falcon A1 10W

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Laser Engraving