3D Printing Creality

Creality Clog Poke Nozzle Cleaning Tool

Pushes a jam out of the hotend from the top — no teardown.

Creality

Clog Poke Nozzle Cleaning Tool

Kraang Finds

Best for Clearing clogsfilament jamshotend maintenance

Most clogs aren’t in the nozzle tip — they’re a plug of plastic stuck higher up the filament path. This is a long, stiff 1.5 mm rod with an arrow tip shaped to match the nozzle, so instead of poking a thin hole through the jam it pushes the whole plug down and out. For a lot of everyday jams, that can replace a full hotend teardown.

Pro tip Heat the hotend to printing temperature before you poke. You want to push soft plastic out, not force steel through a cold, hard plug.

Why we like it

✓Can save you from taking the hotend apart to clear a jam
✓1.5 mm arrow tip fills the 1.75 mm filament path, so it pushes the whole plug out
✓210 mm long, enough to reach down through the extruder

Keep in mind

!Only for printers that use 1.75 mm filament
!Pushes from the top only — it doesn't clean the tiny nozzle opening itself

Needle: 1.5 mm, arrow tip
Length: 210 mm
Filament: 1.75 mm
Material: Steel
Grip: Soft rubber, hanging hole

Check price on Amazon

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.