3DZWMAN
3DZWMAN LED Lamp Kit 001, 3 Pack (3 Colors, Dimmable, USB)
Lithophane lamps and shades, MakerWorld lamp models, giving three lamps at once
Black first, white from above — a primer trick that paints the shadows in before you open a single paint bottle.
Paint doesn’t stick well to bare resin, and a primer coat fixes that. It also hides small layer lines and support marks so you can see what still needs sanding.
The zenithal trick makes primer do more: spray the whole figure black, then spray white only from above, like sunlight. The top surfaces turn light and the recesses stay dark, so the figure already has shading before you paint. That’s exactly what one-coat paints like Speedpaint are designed to sit on.
Pro tip Use short bursts from about 20–30 cm and several thin coats instead of one heavy one. A thick coat of primer fills the fine details you printed in resin for in the first place.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
3DZWMAN
Lithophane lamps and shades, MakerWorld lamp models, giving three lamps at once
3M
Sanding primer on 3D prints, smoothing between paint coats, small prop and model work
Allen Tech
Replacing Bowden and hotend PTFE tubes, cutting pneumatic and silicone tubing
Amazon Basics
Powering USB lamps and LED strips, two lamps from one outlet, gifts that need their own plug