Kraang Finds
More ▾
Products About
3D Printing ANYCUBIC

Anycubic Kobra X Multicolor 3D Printer (4-Color)

Four colors loaded at once — the drawing's outline, fill and details come off the plate in one print, no filament swaps.

A child's crayon drawing of a cat next to a 3D-printed keychain of the same cat in matching colors
Best for Multicolor keychains and badgeskids' drawings and logoseveryday PLA prints

A kid’s drawing is usually a few flat colors inside a dark outline, which is exactly what a multicolor printer is good at. Each color in the drawing becomes one filament, and the printer switches between them on its own while the keychain is printing. With four colors loaded, most drawings fit without simplifying them.

The Kobra X carries its four spools on a holder on top of the frame, so it doesn’t need extra desk space for a separate color box. Auto leveling matters more than it sounds for keychains: they’re thin, flat prints where the whole design is in the first few layers.

Pro tip Fill the plate. Ten keychains with the same four colors take barely longer than two, because the printer changes color once per layer for the whole plate, not once per keychain. Print extras for grandparents, aunts and uncles.

Why we like it

  • ✓Four colors built in, no separate color unit needed to start
  • ✓Expandable to more colors with extra ACE 2 Pro units, Anycubic says
  • ✓260 × 260 × 260 mm (10.2 in) build volume — a whole plate of keychains in one go
  • ✓Auto bed leveling (LeviQ 3.0) with 49-point calibration
  • ✓Wi-Fi and app control, with a camera that watches for failed prints

Keep in mind

  • !Not compatible with the older ACE Pro color unit, only the ACE 2 Pro — check before reusing old gear
  • !Every color change still costs a little purge filament and time; a four-color keychain prints slower than a one-color one
  • !A newer model with fewer reviews than long-running printers
Colors
4 built in
Build volume
260 × 260 × 260 mm
Max speed
600 mm/s
Nozzle
Hardened steel, up to 300 °C
Leveling
LeviQ 3.0, automatic
Materials
PLA, PETG, TPU, PVA, ASA
Connectivity
Dual-band Wi-Fi (2.4/5 GHz), LAN

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More 3D Printing