Kraang Finds
More ▾
Products About
3D Printing AMOLEN

AMOLEN Crystal PLA Translucent Bundle, 1.75 mm, 4 × 200 g (Green, Pink, Orange, Blue)

Four small spools of see-through PLA for the glow plate and the water — the layer that turns a stack of plastic into a lamp.

A glowing layered 3D-printed city map night light in a black shadow box frame, with the unlit layers, acrylic sheet and LED strip for a second one on the bench
Best for Layered map glow and water layerslamp shadessmall translucent accents

In a layered map light, one layer does the glowing: the plate at the back that becomes the river, the harbor and the light behind every street. It has to let light through without showing the LEDs, and translucent PLA does exactly that. A single layer looks like colored glass; by the time you have ten of them stacked, the plate is frosted and the light coming through it is soft and even.

Small spools make sense here. A glow plate needs one color, an accent layer for parks or the old town another, and 200 g of each is enough for a full-size plate plus the test squares. Blue is the obvious water; the green and the orange are for the places where the map needs a second color.

Pro tip Print a 2 × 2 in (5 cm) square of each color at your layer thickness before the real plate, and hold them against the lit strip in a dark room. The look changes a lot between 1.6 and 2.4 mm, and a square costs minutes.

Why we like it

  • ✓Four translucent colors in 200 g spools — try blue water and a green park without buying a kilogram of each
  • ✓A few stacked layers come out frosted rather than clear, which is what spreads a backlight evenly
  • ✓±0.02 mm diameter tolerance
  • ✓The same listing has single colors, including a clear transparent, if you only need one

Keep in mind

  • !A full 8 × 10 in plate at 2 mm takes around 130 g, so each 200 g spool covers one glow plate with a little to spare — not two
  • !Translucent PLA shows every infill line when backlit, so these layers have to be printed at 100% infill
Material
PLA (translucent)
Colors
Green, Pink, Orange, Blue
Diameter
1.75 mm ± 0.02 mm
Spools
4 × 200 g (800 g total)
Part number
#1-3DPLATPBUPKORGN

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More 3D Printing