Kraang Finds
More ▾
Products About
Electronics DORHEA

DORHEA 12 V to 5 V 3 A Buck Converter (Sealed)

A sealed little box that turns the pump's 12 V into a steady 5 V for the board.

DIY auto-topping pet water bowl with a sensor, clear reservoir and small pump, a cat drinking
Best for Running 5 V electronics from a 12 V supplycar and RV projectsdamp locations

Small adjustable buck boards work, but their tiny trim screw can drift and they’re bare circuit boards. This one has a fixed 5 V output in a closed aluminum case, which is a better fit for a project that lives next to a water bowl and runs all day.

Three amps is far more than an ESP32 board needs. The extra margin simply means the converter runs cool.

Pro tip Before you connect the board, power the converter on its own and check the output with a multimeter: 5 V on the yellow lead, ground on black. Then connect it to the board’s 5V and GND pins.

Why we like it

  • ✓Fixed 5 V output at up to 3 A from a 6.3–22 V input
  • ✓Aluminum case, sealed with silicone, DORHEA says — suited to a damp spot near water
  • ✓Over-current, over-temperature and short-circuit protection
  • ✓Flying leads, nothing to adjust or set up

Keep in mind

  • !Bare wire ends; you need to solder, crimp or use lever connectors to join them
  • !Reversing the input or output polarity can damage it, so check the colors twice
Input
6.3–22 V DC
Output
5 V DC, 3 A (15 W)
Case
Aluminum, silicone sealed
Weight
18 g
Model
15763-1

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Electronics