Kraang Finds
More ▾
Products About
3D Printing YOOPAI

YOOPAI Filament Storage Box, 6-Pack

One sealed, see-through box per spool — the dried filament stays dry on the shelf.

3D printer printing from a sealed filament dry box, with stored spools in clear boxes and a hygrometer on a rainy evening
Best for Storing opened spoolssorting colors and materialsshelves and closets in humid rooms

Drying a spool doesn’t help much if it goes straight back on an open shelf. In a humid room, PETG or TPU can pick up enough moisture in a few days to start stringing again. A sealed box with desiccant keeps the dry spool dry until you need it.

These are simple: one clear box per spool with a sealed flip lid, plus desiccant and labels. Having six means each open spool gets its own box, and you can sort them by material at a glance.

Pro tip Write the material and the date you dried it on the label. When a spool starts printing badly, you’ll know right away if it has been sitting for months.

Why we like it

  • ✓Six separate boxes, one spool each
  • ✓Flip lid with a silicone seal
  • ✓Clear body — you can see color and how much is left without opening it
  • ✓Comes with 2 × 500 g desiccant boxes and 18 labels
  • ✓Stack on a shelf like food containers

Keep in mind

  • !Storage only — no feed port; printing from it means modifying the lid yourself
  • !No hygrometer included, so you can't see the humidity inside
  • !Sized for standard 1 kg spools; check extra-wide spools before you buy
Boxes
6
Volume
4.0 L each
Size (per listing)
9.03 × 8 × 3 in
Spool
Most standard 1 kg, 1.75 mm
Includes
2 × 500 g desiccant, 18 labels

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More 3D Printing