Kraang Finds
More ▾
Products About
Workshop Whiteside

Whiteside RD1600 Spiral Downcut Bit, 1/8 in, 1/4 in Shank

A small solid-carbide downcut bit that cuts ornaments and coasters free with clean, splinter-free top edges.

Desktop CNC router with a birch sheet of cut-out ornaments, finished carved ornaments, coasters and a small sign on the bench
Best for Cutting out ornaments and shapespockets in plywoodsmall inlays

After the V-bit carves the design, something has to cut the shape free. On plywood the top face is the one people see, and an upcut bit tends to lift and fray those top fibers. A downcut bit pushes them down instead, so the edge around an ornament or coaster stays clean and needs less sanding.

At 1/8 in across, this bit follows the curves of stars, trees and cut-out lettering, and its 1/2 in cutting length is plenty for 1/4 in sheets.

Pro tip Take step-downs of about half the bit diameter (1/16 in) in 1/4 in plywood and leave small tabs on each part. A downcut bit packs chips into the slot, and shallow passes keep it cool and keep the parts from shifting on the last pass.

Why we like it

  • ✓Downcut spiral pushes fibers down for a clean top edge on plywood
  • ✓1/8 in diameter gets into tight curves and inside corners
  • ✓Solid carbide, two flutes
  • ✓Pushes chips down, which helps hold thin sheets in place

Keep in mind

  • !Chips pack into the slot instead of clearing — cut in several shallow passes
  • !A 1/8 in bit is easy to snap with an aggressive feed or deep step-down
Cutting diameter
1/8 in
Cutting length
1/2 in
Shank
1/4 in
Overall length
2 in
Flutes
2
Model
RD1600

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Workshop