Kraang Finds
More ▾
Products About
Workshop Whiteside

Whiteside 1502 V-Groove Router Bit, 90°, 1/2 in, 1/4 in Shank

A 90° V-bit for lettering, names and line art — the bit behind most personalized CNC signs and ornaments.

Desktop CNC router with a birch sheet of cut-out ornaments, finished carved ornaments, coasters and a small sign on the bench
Best for V-carved signsnames on ornamentscoaster designs

Personalization is what turns a plain shape into a gift: a name on an ornament, a family name on a sign, a pattern on a coaster. V-carving does that with one bit. The software varies the depth to match the width of each stroke, so the lettering comes out crisp with sharp inside corners.

A 90° V-bit is the usual starting point: it’s a standard angle in V-carve software, it cuts relatively shallow for a given width, and at 1/2 in across it covers everything from small names to a bold sign title.

Pro tip Set a flat depth (or max depth) so the bit can’t plunge deeper than about half the sheet thickness. On 1/4 in plywood, a wide letter can otherwise cut straight through or break into the glue line between plies.

Why we like it

  • ✓90° is a standard V-bit angle in V-carve software
  • ✓1/2 in diameter handles both fine lettering and wider strokes
  • ✓Carbide-tipped, made for natural wood, composites and hard plastics
  • ✓1/4 in shank fits common desktop CNC and trim-router collets

Keep in mind

  • !A 90° tip can't reach the finest serifs of very small text — a 60° or 30° bit is better for tiny lettering
  • !Carbide-tipped, not solid carbide; the edges can chip if the bit is dropped
Angle
90° included
Cutting diameter
1/2 in
Point length
1/4 in
Shank
1/4 in
Overall length
1-7/8 in
Model
1502

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Workshop