Kraang Finds
More ▾
Products About
Workshop WEN

WEN 4206T 8 in 5-Speed Benchtop Drill Press

A compact cast iron drill press for straight axle holes and clean, flat-bottomed pockets.

A handmade maple wooden toy train with turned wheels and flush magnetic couplers on a workbench, a child's hand pulling the locomotive
Best for Toy makingaxle and dowel holesForstner bitssmall woodworking and hobby drilling

The part of a toy train that’s hardest to do well by hand is the axle hole. If one hole leans a few degrees, that wheel rubs the body or the car rolls in a curve. A drill press drills every hole at exactly 90 degrees and to the same depth with the depth stop, which is why it’s the tool that makes a homemade train look store-bought.

The WEN is a small benchtop model that covers this kind of work: axle holes in the side of a car, shallow pockets for magnets and cargo with Forstner bits, and holes for a chimney or smokestack. It isn’t built for deep holes in big stock, but toy parts are short and light.

Pro tip Clamp a straight board to the table as a fence, at the distance of the axle line from the bottom of the car. Every car then gets its holes in the same place without measuring again.

Why we like it

  • ✓Holes come out square to the face, so the wheels on a car sit level
  • ✓Five speeds from 750 to 3,200 RPM; the slow end suits large Forstner bits
  • ✓1/2 in keyed chuck takes the full range of Forstner bits
  • ✓Small enough to live on a shelf at 23 in tall

Keep in mind

  • !2 in of spindle travel limits deep holes in one pass
  • !Speeds change by moving a belt, not a dial
  • !The 6.5 in table is small; a scrap plywood table and fence help a lot
Motor
2.3 A induction, 120 V
Swing
8 in
Spindle travel
2 in
Speeds
750, 1,100, 1,500, 2,100, 3,200 RPM
Chuck
1/2 in keyed
Table
6.5 x 6.5 in, bevels 45° left and right
Height
23 in
Weight
32 lb

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Workshop