Kraang Finds
More ▾
Products About
Workshop WEN

WEN 3921 16 in Variable Speed Scroll Saw

A benchtop scroll saw that rips thin strips and cuts cubes in half, with fingers well away from a spinning blade.

A handmade modular marble run of maple blocks and pine ramps on a workbench, a child's hand dropping a glass marble into the top
Best for Toy partsthin stripscurves and cut-outssmall blocks

A scroll saw is one of the gentler power tools for small parts. The thin blade moves up and down instead of spinning, and it cuts slowly enough that small pieces can be guided with a push stick. For a marble run it does two jobs: ripping narrow side rails from flat strips, and slicing 2 in cubes into half-height blocks for gentler ramp angles.

The WEN’s blade can be mounted turned 90 degrees, which WEN says gives unlimited ripping capacity: the strip passes beside the arm instead of hitting it. That’s what makes long, straight rails possible on a 16 in saw.

Pro tip For rails, clamp a straight scrap to the table as a fence 1/2 in from the blade and feed the strip slowly. Cut all the rails in one session with the fence untouched, so every ramp ends up with walls of the same height.

Why we like it

  • ✓Blade mounts in two directions; turned 90° it can rip strips of any length
  • ✓Cuts wood up to 2 in thick, enough to slice a 2 in cube in half
  • ✓Variable speed, 400 to 1,600 strokes per minute
  • ✓Air pump, work light and dust port keep the cut line visible

Keep in mind

  • !Ripping long strips takes patience; a fence clamped to the table is a must
  • !At 25.5 lb it creeps on a bench unless it's bolted or clamped down
  • !The included blades are general-purpose; finer blades help on thin pine
Throat
16 in
Max cut
2 in thick
Speed
400–1,600 strokes/min
Table
16 × 11 in, bevels 45° left
Power
120 V, corded
Weight
25.5 lb

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Workshop