Kraang Finds
More ▾
Products About
Woodworking Walrus Oil

Walrus Oil Live Edge Walnut Slabs, 3-Pack

Three kiln-dried walnut boards with the bark edge still on — enough wood for several serving boards.

A finished walnut live-edge charcuterie board with a turquoise epoxy inlay in a knot and crack, cheese and grapes on the wood
Best for Live-edge charcuterie and serving boardsepoxy inlayssmall shelves

A live-edge board starts with picking the board, and that’s the part an online order makes harder: you get what the pack contains. The upside here is that it’s three long boards, not one short blank. A 36-inch board leaves room to cut around a bad check or a loose patch of bark and still get a 14–18 in board with the most interesting knot in the middle.

Walnut is the classic choice for epoxy work because it’s dark. Clear, white, turquoise or metallic resin all read strongly against it, and the natural defects (knots, small cracks, bark pockets) are exactly the voids an inlay fills.

Pro tip Before you cut, wipe the board with a damp cloth or mineral spirits. The wet wood shows the color and figure it will have after oiling, and makes it easier to decide where the epoxy vein should run.

Why we like it

  • ✓Real live edge on the boards, with knots and bark inclusions that make natural spots for an epoxy inlay
  • ✓Kiln dried below 10% moisture, per the listing, so the wood is ready to work
  • ✓36 in long — each board cuts into two or three serving boards
  • ✓Walnut's dark color makes bright or clear epoxy stand out

Keep in mind

  • !Every board is different; you can't choose the knots, cracks or width you get
  • !Unfinished and 7/8 in thick — expect to flatten and sand before the pour
  • !Bark on a live edge can be loose and may need to come off or be stabilized
Wood
Walnut, unfinished, kiln dried (below 10% moisture)
Size
36 in long × 6–10 in wide × 7/8 in thick (each)
Pack
3 boards
Model
WOSM-W24-3PK

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Woodworking