3M
3M Pro Grade Precision 3-in-1 Sanding Sponge, 220 Grit, 2 Pack
Prepping sign blanks for burning, cleaning up after burning, light sanding between coats
A light, flexible tool hose with click-on adapters for most sanders and saws.
The tool side of a cyclone rig is where most of the frustration lives. Every sander and saw has a different dust port, and the shop vac’s own hose is thick, stiff and heavy enough to pull a random-orbit sander off the work. A thinner, lighter hose with a set of click-on adapters fixes both.
Cen-Tec’s kit pairs a 10 ft hose with adapters for the common port sizes, and each one clicks into a collar on the hose end, so moving from the sander to the jigsaw takes a few seconds. The swivel ends keep the hose from twisting, and the air-relief collar lets you bleed off suction when it grabs the work too hard.
Pro tip On a random-orbit sander, open the air-relief collar a little. Full suction can pull the pad flat against the work and leave swirl marks; a bit less suction still clears the dust.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
3M
Prepping sign blanks for burning, cleaning up after burning, light sanding between coats
Barrington Hardwoods
Wooden toy trains and cars, small boxes, toy and craft projects in hardwood
Coowayze
Marble run ramps, small frames, trays, model and craft builds
Craftparts Direct
Wooden toy cars and trucks, pull toys, model vehicles