Kraang Finds
More ▾
Products About
Woodworking Coowayze

Coowayze Pine Wood Strips, 1/4 × 1-1/2 × 12 in, 15-Pack

Thin, flat pine strips that become the ramps between the towers of a marble run.

A handmade modular marble run of maple blocks and pine ramps on a workbench, a child's hand dropping a glass marble into the top
Best for Marble run rampssmall framestraysmodel and craft builds

The towers of a marble run are blocks; the ramps that connect them are thin channels. These strips do both jobs in a ramp: one strip, left full width, is the floor, and narrow rails ripped from another strip glue along its edges to make the walls. The result is a light, open-topped channel that sits on top of the blocks.

The same listing comes in shorter and longer lengths, so you can add short, steep ramps and long, gentle ones later without changing the design.

Pro tip Sight down each strip before you use it and save the straightest ones for ramp floors. A slight bow is fine for a side rail, where the glue and clamps pull it flat.

Why we like it

  • ✓1-1/2 in wide, so one strip is the floor of a ramp with room for side rails
  • ✓12 in long, a good ramp length between two towers
  • ✓Sanded flat stock — no planing or ripping wide boards to thickness
  • ✓Fifteen strips cover the floors and the rails for several ramps

Keep in mind

  • !Pine is soft; ramp edges dent more easily than the maple cubes
  • !At 1/4 in thick, a long ramp can bow a little if it isn't glued straight
Wood
Pine, unfinished
Size
1/4 × 1-1/2 × 12 in (6 × 38 × 305 mm)
Pack
15 strips
Other sizes
1/2 to 2 in wide, 6 to 17-1/2 in long

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Woodworking