Kraang Finds
More ▾
Products About
Woodworking Walrus Oil

Walrus Oil Cutting Board Oil, 8 oz

A mineral oil and beeswax blend for food boards — wipe on, let it soak, wipe off.

A finished walnut live-edge charcuterie board with a turquoise epoxy inlay in a knot and crack, cheese and grapes on the wood
Best for Charcuterie and serving boardscutting boardswooden utensils

A charcuterie board is a food surface, so the finish has to be one you’d be fine eating off. Oil and wax are the standard choice: they soak into the wood, keep it from drying out and cracking, and leave nothing that can peel. On walnut the first coat is also the moment the board changes from dusty brown to deep chocolate.

The epoxy doesn’t need oil, and oil wiped across it simply comes off with the excess. That makes it easy to finish the whole board in one pass.

Pro tip On a new board, apply a heavy first coat, wait 20 minutes and wipe off what didn’t soak in; repeat the next day. Lay oily rags flat outside to dry before throwing them away, as with any oil finish.

Why we like it

  • ✓Mineral oil, fractionated coconut oil, beeswax and vitamin E — a short ingredient list
  • ✓Walrus Oil describes it as FDA compliant for food-contact surfaces
  • ✓Wipe-on finish; no brush, spray or long wait between coats
  • ✓Brings out the dark color of walnut

Keep in mind

  • !An oil-and-wax finish, not a film — it needs a fresh coat every few weeks of use
  • !Does nothing for the epoxy itself; the inlay just gets wiped clean
  • !8 oz goes quickly if you flood several new boards
Volume
8 fl oz (236 ml)
Ingredients
Mineral oil, beeswax, fractionated coconut oil, vitamin E
Application
Thin coat, let soak, wipe off
Model
WO-CBO8

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Woodworking