3M
3M Pro Grade Precision 3-in-1 Sanding Sponge, 220 Grit, 2 Pack
Prepping sign blanks for burning, cleaning up after burning, light sanding between coats
A house-wrap tape that epoxy doesn't stick to — a simple way to seal a void and build a dam for a pour.
Epoxy flows into every gap it can find, including the hairline crack on the underside of a board. A layer of tape pressed hard across the back of every void turns the board into its own mold. Tuck Tape is a building tape, but its polypropylene face doesn’t bond to epoxy, which is why it shows up in so many river-table builds.
The same tape covers the edges of a melamine or plywood dam, so the epoxy that runs over the edge pops off the form instead of gluing it to the board.
Pro tip Burnish the tape with a plastic scraper or the back of a spoon, especially over the grain around a crack. Epoxy finds the smallest channel under loose tape, and a leak during a pour is much harder to fix than a minute of rubbing.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
3M
Prepping sign blanks for burning, cleaning up after burning, light sanding between coats
Barrington Hardwoods
Wooden toy trains and cars, small boxes, toy and craft projects in hardwood
Cen-Tec Systems
Connecting sanders, track saws and routers to a shop vac or cyclone, swapping between tools quickly
Coowayze
Marble run ramps, small frames, trays, model and craft builds