Kraang Finds
More ▾
Products About
3D Printing TempPro

TempPro TP49 Digital Hygrometer, 2-Pack

Tells you how humid the room — or the inside of the box — really is.

3D printer printing from a sealed filament dry box, with stored spools in clear boxes and a hygrometer on a rainy evening
Best for Checking room humidity by the printerinside a filament storage boxknowing when to dry

Wet filament is easier to prevent when you know the humidity. A small hygrometer by the printer shows when the room climbs into the 50s and 60s — common in fall and in basements — and that’s when open spools start taking on moisture.

The TP49 is small enough to sit inside a storage box next to the spool, so the second one in the pack can tell you if the box’s seal and desiccant are still doing their job.

Pro tip Inside a sealed box with fresh desiccant, the reading should drop well below the room’s. If it slowly climbs back toward the room’s humidity, recharge the desiccant or check the seal.

Why we like it

  • ✓Shows humidity and temperature on large digits
  • ✓Humidity accuracy ±2–3 % RH, per TempPro
  • ✓Updates every 10 seconds
  • ✓Stand, magnet or hanging hole
  • ✓Two in the pack — one for the room, one in a storage box

Keep in mind

  • !No history or app — it shows only the current reading
  • !Rated to 158 °F (70 °C); keep it out of a heated dryer
Humidity
10–99 % RH, ±2–3 % RH
Temperature accuracy
±1 °F (±0.56 °C)
Refresh
10 s
Size
about 1.5 × 2.4 in
Mounting
Stand, magnet, hanging
Pack
2, batteries included
Model
TP-49W-2

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More 3D Printing