Kraang Finds
More ▾
Products About
Electronics SENSKY

SENSKY BS010L 12 V Mini PIR Motion Sensor Switch with Light Sensor

An inline 12 V motion switch with a barrel plug on each lead — it goes between the battery and the LED strip, with no wiring.

3D-printed motion-activated LED light bar stuck by magnets under a steel shelf, lighting a workbench with spare strip and magnets on it
Best for Motion-activated LED stripscabinet and safe lightingbattery-powered 12 V lights

The simplest way to make a 12 V light motion-activated is a switch that sits in the cable. This one has a DC socket on one lead and a plug on the other: power comes in from the battery, and the strip gets it only when the sensor sees movement. Three adjustments set how it behaves: how long the light stays on, how close you need to be, and how dark it has to be before it reacts at all.

That last one matters for a work light. With the light threshold set low, the sensor ignores you in a bright room and saves the battery for dark corners; set high, the light comes on whenever you walk up. Sensky’s own advice is to turn the delay to its minimum first and tune the other two from there.

Pro tip A PIR sensor picks up moving body heat, and it can’t see through glass or solid plastic. Let the white dome look out through an opening in the enclosure, and aim it at where your arms and shoulders move, not at the workpiece.

Why we like it

  • ✓Sits in the cable between a 12 V supply and an LED strip, on DC barrel connectors
  • ✓Adjustable delay, sensitivity and ambient-light threshold
  • ✓The delay restarts each time it sees motion, so the light stays on while you keep moving
  • ✓Rated for 12–30 V and loads up to 3 A

Keep in mind

  • !PIR sensors detect movement, not presence — hold still long enough and the light times out
  • !Rated from 12 V up, while a lithium pack drops below that as it empties, so recharge early
  • !The listing gives no numbers for the delay range or the plug size
Voltage
12–30 V DC
Max load
3 A
Adjustments
Delay, sensitivity, light sensor
Range
Up to 7 m (23 ft), per listing
Sensor body
1.89 × 0.98 × 0.55 in (48 × 25 × 14 mm)
Connectors
DC barrel socket and plug on leads

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.

Featured in

More Electronics