3D Printing AMERVAULT

AMERVAULT 3D Print Removal Tool Kit (Knife + Spatula)

A beveled knife and an offset spatula made for getting prints off the bed — not a repurposed paint scraper.

AMERVAULT

3D Print Removal Tool Kit (Knife + Spatula)

Kraang Finds

Best for Removing stuck printscleaning plastic off the bedlifting large flat parts

The first fight with every print is getting it off the bed. A kitchen knife or a paint scraper either can’t get under the edge or digs into the build surface. A dedicated knife with a beveled edge slides in under the first layer and lets you lever the part up from one side.

This kit has two tools: a long knife for bigger parts and a small offset spatula for small parts and corners. The blades are riveted in place, so they don’t spin in the handle when you push.

Pro tip Let the bed cool down before you start prying. Most prints release on their own once the bed is at room temperature, and you’ll need far less force.

Why we like it

✓Long knife with a beveled front edge slides under the print
✓Smaller offset spatula for tight spots and small parts
✓Hardened stainless blades, riveted so they don't twist in the handle
✓Rounded edges are kinder to the bed than a razor

Keep in mind

!Any metal blade can scratch PEI or textured beds — keep it low and flat
!Flexing the bed plate is still the gentler first option, if your printer has one

Pieces: Knife + offset spatula
Blades: Hardened stainless steel, rounded edges
Blade mount: Riveted
Length: About 10.6 in (knife)

Check price on Amazon

As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.