3M
3M Pro Grade Precision 3-in-1 Sanding Sponge, 220 Grit, 2 Pack
Prepping sign blanks for burning, cleaning up after burning, light sanding between coats
Ten discs each of 80, 100, 120, 150 and 220 grit — the whole sequence for one board and the next few.
An epoxy inlay goes through more sandpaper than a plain board, because the first grit has to cut through hard resin standing above the wood. Ten discs of each grit covers that, with enough left for the next board. The sequence is also the right one for a food board finished with oil: 80 to level, 120 to remove the scratches, 220 to finish.
What it doesn’t include is anything above 220. For a matte, oiled charcuterie board that’s fine. For a glassy polished inlay, add a pack of 320–600 discs.
Pro tip Don’t skip grits to save time. Each grit only removes the scratches of the one before it, and walnut shows a skipped step as fine swirls the moment it’s oiled. Wipe the board between grits so loose grit doesn’t scratch it.
Why we like it
Keep in mind
As an Amazon Associate I earn from qualifying purchases. If you buy through a link on this page we may earn a small commission, at no extra cost to you. How this works.
3M
Prepping sign blanks for burning, cleaning up after burning, light sanding between coats
Barrington Hardwoods
Wooden toy trains and cars, small boxes, toy and craft projects in hardwood
Cen-Tec Systems
Connecting sanders, track saws and routers to a shop vac or cyclone, swapping between tools quickly
Coowayze
Marble run ramps, small frames, trays, model and craft builds